Metals & Mining, Energy Transition, Non-Ferrous, Carbon
November 16, 2026
Redwood builds 2 GWh EV battery reserve for grid storage push
Editor:
HIGHLIGHTS
Company stockpiles 2 GWh in used EV batteries
Second-life storage meets half of US demand
Company collects 80,000 tons of recyclables yearly
Redwood Materials holds 40,000 to 50,000 used EV battery packs in inventory, ready for high-capacity energy storage deployment, totaling 2 gigawatt-hours, and it expects to double that volume within the next year.
Redwood Materials, which has been around since the late 2010s and sees itself as the largest lithium-ion battery recycler in North America, is about to report first successes of its new business since its launch in 2025, the company's Vice President of Sales and Business Development Dustin Krause told the Ni Battery Day held by the Nickel Institute on the week to Nov. 13.
"We have some large energy storage deployments with some very interesting applications that you should be hearing about in the next few weeks," he said.
Redwood brings in about 80,000 tons of recyclable materials globally each year - everything from a coin cell battery to batteries from locomotives- but end-of-life EV batteries comprise the largest chunk of that feed.
Realizing that some incoming packs are still too good to recycle, the company found a new revenue stream in giving spent EV batteries a second life in stationary energy storage systems. It estimates that, beginning in the early 2030s, second-life battery deployment could meet half of the US energy storage demand.
Perfectly suited for energy storage
To decide whether a battery should be repurposed or recycled, it undergoes testing; if the results show it has usable life left, it goes into second-life energy storage.
"Once we extract the battery's full use, we will recycle it," Krause said.
"When you look at EV battery packs for an energy storage solution, they're way overbuilt," he said, meaning that using them in stationary energy storage skips several expensive steps, given that automakers engineer EV batteries to survive extreme stress. "These packs are meant to be outside and are perfect to be deployed because we don't have to worry about additional racking, additional enclosures or anything else."
By extracting the residual value of spent batteries, the company is doing the right thing from a CO2 perspective, while also changing the economics of recycling to mutual benefit, according to Krause.
A vehicle OEM that wants to recycle an LFP battery with any recycler worldwide has to pay for it because LFP batteries are made of cheap materials rather than expensive metals like cobalt or nickel and breaking them down for their raw materials costs more than the scrap is worth, he explained.
A recycler that can repurpose these batteries can completely reverse those economics, he said, but added that Redwood's energy storage systems are actually chemistry-agnostic.
"The secret sauce is that we can use a variety of battery types- LFP, NMC - whatever is available- in a single system, regardless of manufacturer or chemistry, provided each pack is 50 kWh or larger," he said.
The two businesses are complementary. "Without the grid energy storage business, we couldn't retain as much of the recycling business," Krause said.
Bringing feed to sites at lowest cost
The company still spends much of its time fine-tuning its collection processes and developing tools and systems to easily pick up spent battery packs wherever they may be found, especially given how many batteries are coming to market.
Redwood Materials expects 1 TWh (1,000 GWh) of EV battery packs to become available in the US through 2040, and believes its current infrastructure and partnerships with automakers position it to handle more than 400 GWh of that supply.
"If you can't get the collection piece right, it doesn't matter how good your technology is, you will not be a very strong recycler," Krause explained why much of the company's efforts go into getting batteries to its site in a way that is both economical and easy for customers.
"Whether you're a cell maker or an OEM of vehicles or consumer electronics, you want these batteries off your site as quickly as possible, since some can be hazardous. That's why we focus on serving our customers well, so we can get those batteries back to us," he said.
Redwood Materials operates two locations in the US -- in Reno, Nevada, and in Charleston, South Carolina -- and one in Europe.
Its Reno site is purposefully located "as close to California as possible without actually being in California."
"Most of the EV sales over the last 10 years have been in California and the West Coast, and so the first tidal wave of EV battery packs in North America comes from that part of the US," Krause praised the perk of the location.
The company's other site in Charleston is nestled in the Battery Belt of the US, including Georgia, North Carolina, South Carolina and Tennessee, where much of the battery production is happening, so also in immediate proximity to battery scrap sources.
In Europe, Redwood Materials operates in Germany, the continent's vehicle OEM base, and a place with well-established waste collection schemes.
The company has created many partnerships and a logistics network across the vehicle OEM space. It works with every automaker in some way or another to bring in their battery packs.
It also works with automotive dismantlers, because "when you sign a contract with Volkswagen USA, for instance, they're based in Virginia, but their battery packs don't come from there.
"They're coming from VW's dealers. And you need to figure out ways to communicate with them," Krause said. "They tell you, "Hey, I just did a repair on a VW ID.4, and that module needs to be picked up from my site. We've done a lot of work on software and integration, so when a repair is done, we are alerted within 72 hours. We go to that site and pick up that battery. And we do this across industries, including vehicle OEMs, consumer electronics companies, cell makers and major retailers."
Krause added that Redwood Materials works in the power-tool space. "We see thousands and thousands of power-tool batteries, as more and more of the world is becoming electric, even outside of vehicle OEMs," he said.
On the output and distribution side, the company is starting to think beyond just batteries, exploring other pathways for the lithium, nickel and other battery components it recovers through its multiple recycling technologies, including pyrolysis and hydrometallurgy.